CAN filter for Toyota C-HR (2017-2023) cars odometer "pause" for testing purposes.
KMTEST (KMSTOP... Speedstop... Mileage Blocker... Stopper...)
To change mode the "Cancel" button (on steering wheel) should be pressed 3 times at the same pace from 1 to 2 seconds per press.
At mode changing the High Beam indicator on dashboard blinks.
Number of blinks corresponds to selected mode (this indication does not affect actual state of high beam lamp).
To check current mode without changing (!) it the "Cancel" button should be pressed and held more 4 seconds.
1. High beam light on cluster will blink 1x -> "KMTEST" disabled (Factory Mode),
2. High beam light on cluster will blink 2x -> The kilometers counts 50% of real mileage, (speedometer, cruise and other functions works fine),
3. High beam light on cluster will blink 3x -> The kilometers counts 10% of real mileage, (speedometer, cruise and other functions works fine) *
After Ignition OFF/ON "KMTEST" keeps selected working mode.
If you remove "KMTEST" adapter after test drive, odometer not changing.
After disconnecting / connecting the battery, "KMTEST" goes into "Factory Mode" (disabled).
Tested: C-HR (2019-2023) with HALF digital dashboard...
* "KMTEST" with odometer "full freezed" - available (optional).
KMTEST (KMSTOP... Speedstop... Mileage Blocker... Stopper...)
To change mode the "Cancel" button (on steering wheel) should be pressed 3 times at the same pace from 1 to 2 seconds per press.
At mode changing the High Beam indicator on dashboard blinks.
Number of blinks corresponds to selected mode (this indication does not affect actual state of high beam lamp).
To check current mode without changing (!) it the "Cancel" button should be pressed and held more 4 seconds.
1. High beam light on cluster will blink 1x -> "KMTEST" disabled (Factory Mode),
2. High beam light on cluster will blink 2x -> The kilometers counts 50% of real mileage, (speedometer, cruise and other functions works fine),
3. High beam light on cluster will blink 3x -> The kilometers counts 10% of real mileage, (speedometer, cruise and other functions works fine) *
After Ignition OFF/ON "KMTEST" keeps selected working mode.
If you remove "KMTEST" adapter after test drive, odometer not changing.
After disconnecting / connecting the battery, "KMTEST" goes into "Factory Mode" (disabled).
Tested: C-HR (2019-2023) with HALF digital dashboard...
* "KMTEST" with odometer "full freezed" - available (optional).
Brändi | Unitehs |
---|---|
Paino | 100g |
Automerkin mukaan | Toyota |
CAN bus, K line... filters, emulators | KMTEST, SPEEDSTOP |
0.0
yhteensä
(0 asiakasarvostelua)
Arvosteluja ei ole vielä.